Trimline Wall Telephone - Orange

Beautiful rotary dial Trimline wall telephone in orange.

The Restoration Process

Dial – The dial has been fully disassembled, cleaned, lubed and timed to ensure years of trouble free service. A brand new plastic finger wheel and dial card have been added

Cords – The phone has been outfitted with a line cord that has a modular connection to facilitate a modern connection to your wall jack.

Shell – The shell has been painstakingly put through a multi-step restoration process which includes sanding with 400, 800, 1000, 2000 grit. This ensures that there are no scratches, dents or dings. The shell is them carefully buffed on our two step buffing wheels. This takes out the fine abrasions left by sanding and leaves the plastic with a smooth factory fresh finish. Finally, we hand apply a three-step plastic restoration compound. This leaves the plastic with a beautiful high gloss finish. This process can take up to 3 hours to complete, but we think it is well worth the amazing results

The phone goes through extensive testing before to ensure it is in perfect working condition prior to shipping.

Do you currently have any rotary phones? If the answer is no, it is always a good idea to call your local phone company and check if they still support “pulse” dialing. If they do, you are all set to go. If they do not, your phone will not be able to place calls without a converter. We have external solution for this phone.

As an alternative, we provide an option to use this phone as an extension of your cell phone. The XLink Bluetooth gateway is an device external to the phone that gets it’s power from a standard AC outlet. The cord from the phone will then connect to a phone jack on the gateway. When you pair the gateway to an active Bluetooth enabled cell phone, you will be able to use the vintage phone just like it was connected to a traditional landline. When someone calls your cell phone, the vintage phone will ring, and you will be able to dial out using the dial on the vintage phone. If you want to be able to call # and * using your rotary dial, you will also need to add the pulse to tone converter option.